Skip to main content

Create Images with Image Builder

You can create and deploy custom images to most infrastructure providers using various tools. Many infrastructure providers have tools that you can use to create custom images for the platform, such as AWS EC2 Image Builder for AWS or Azure VM Image Builder for Azure. You can also use platform agnostic tools, such as HashiCorp Packer, or something more tailored to Kubernetes, such as the Kubernetes Image Builder (KIB) project.

Kubernetes Image Builder

KIB is a project designed to help users create images for various platforms. The project is a consolidation of multiple tools that together work to create an artifact, or in simpler terms, a custom image.

You can use the custom images created by KIB with Palette, assuming the infrastructure provider is supported in Palette. Use the following diagram to understand how you can use KIB to create custom images that you can use with Palette.

A diagram displaying the steps for creating a custom image


  1. Download the KIB project and configure the image builder's packer.json file.

  2. Use the make command to create a custom image containing a specific Operating System (OS) version and flavor.

  3. The custom image is created and distributed to the target regions you specified in the packer.json file.

  4. Create a cluster profile that points to your custom image.

  5. Deploy a host cluster using your cluster profile that contains the custom image.

This guide will teach you how to use KIB to create images for your infrastructure provider so that you can use the custom images in a Palette cluster profile.

Prerequisites

  • Palette v3.4.0 or greater.

  • Git v2.39.1 or greater.

  • Access credentials to the target infrastructure provider. KBI, through the help of Packer, deploys a compute instance to the target environment during the image creation process.

  • The cloud provider you choose may have different requirements. Review the KIB documentation for your provider to learn more about the provider prerequisites.

  • HashiCorp Packer installed v1.8.6 or greater.


warning

To use a commercial OS, you must provide the license before starting the image creation process.

Create an Image

The following steps guide you through creating your image. You will create a custom Red Hat Enterprise Linux (RHEL) image for Amazon Web Services (AWS). RHEL is a commercial product, so you will need license subscription credentials, but you can use the same steps for a non-RHEL image. The critical point to take away in this guide is using KIB to create the image.

  1. Clone the KIB repository.

    git clone https://github.com/kubernetes-sigs/image-builder.git
  2. Switch the directory into the image builder folder.


    cd image-builder/images/capi
  3. Open up the image builder documentation site in your web browser, and review the steps to build an image for your specific infrastructure provider.

  4. If you are using a commercial OS such as RHEL, set the required environment variables per the KIB documentation. For RHEL, the following environment variables are required. Replace the placeholder values with your actual credentials.


    export RHSM_USER=REPLACE_ME
    export RHSM_PASS=REPLACE_ME

    If you want to debug the Packer compute instance in case of an error, set the following environment variable. The Packer flag will allow you to remote connect to the instance versus Packer's default behavior of terminating the instance.


    export PACKER_FLAGS=-on-error=ask
  5. Navigate to the packer folder and open the folder for the target infrastructure provider. Review the packer.json file. Make the desired configuration changes, such as the Kubernetes version, cloud credentials, network settings, instance size, image regions, and more. You must make changes in the file's variables section. The following example shows a condensed version of the variables object.

     "variables": {
    ...
    "ami_groups": "",
    "ami_regions": "us-east-1, us-west-2",
    "ami_users": "",
    "ansible_common_vars": "",
    "ansible_extra_vars": "",
    "ansible_scp_extra_args": "",
    "ansible_user_vars": "",
    "aws_access_key": "",
    "aws_profile": "",
    "aws_region": "us-east-1",
    "aws_secret_key": "",
    "aws_security_group_ids": "",
    "aws_session_token": "",
    "build_timestamp": "{{timestamp}}",
    "builder_instance_type": "m5.xlarge",
    ....
    },
    info

    The file packer.json contains many variables you can use to customize the image. We recommend you review the KIB documentation for your provider as it explains each variable.

  6. Set the credentials for your infrastructure provider. Each infrastructure provider supports different methods for providing credentials to Packer. You can review each infrastructure provider's authentication section by visiting the Packer plugins site and selecting your provider on the left Main Menu.

  7. Next, find the make command for your provider. You can use the following command to get a list of available RHEL options. Replace the grep filter with your target provider.


    make | grep rhel

    Output:

    build-ami-rhel-8                     Builds RHEL-8 AMI
    build-azure-sig-rhel-8 Builds RHEL 8 Azure managed image in Shared Image Gallery
    build-azure-vhd-rhel-8 Builds RHEL 8 VHD image for Azure
    build-node-ova-local-rhel-7 Builds RHEL 7 Node OVA w local hypervisor
    build-node-ova-local-rhel-8 Builds RHEL 8 Node OVA w local hypervisor
    ...
  8. Issue the make command that aligns with your target provider. In this example, build-ami-rhel-8 is the correct command for an RHEL AWS AMI creation.


    make build-ami-rhel-8

    Output:

    amazon-ebs.{{user `build_name`}}: output will be in this color.

    ==> amazon-ebs.{{user `build_name`}}: Prevalidating any provided VPC information
    ==> amazon-ebs.{{user `build_name`}}: Prevalidating AMI Name: capa-ami-rhel-8-v1.24.11-1683320234
    amazon-ebs.{{user `build_name`}}: Found Image ID: ami-0186f9012927dfa39
    ==> amazon-ebs.{{user `build_name`}}: Creating temporary keypair: packer_64556dab-95d3-33e6-bede-f49b6ae430cb
    ==> amazon-ebs.{{user `build_name`}}: Creating temporary security group for this instance: packer_64556dae-fb5a-3c7d-2106-1c8960c6d60e
    ==> amazon-ebs.{{user `build_name`}}: Authorizing access to port 22 from [0.0.0.0/0] in the temporary security groups...
    ==> amazon-ebs.{{user `build_name`}}: Launching a source AWS instance...
    amazon-ebs.{{user `build_name`}}: Instance ID: i-06a8bf22b66abc698
    ....
  9. When the build process completes, note the image ID.


     Build 'amazon-ebs.{{user `build_name`}}' finished after 22 minutes 29 seconds.

    ==> Wait completed after 22 minutes 29 seconds

    ==> Builds finished. The artifacts of successful builds are:
    --> amazon-ebs.{{user `build_name`}}: AMIs were created:
    us-east-1: ami-0f4804aff4cf9c5a2

    --> amazon-ebs.{{user `build_name`}}: AMIs were created:
    us-east-1: ami-0f4804aff4cf9c5a2
  10. Log in to Palette.

  11. Navigate to the left Main Menu and select Profiles.

  12. Click on the Add Cluster Profile button.

  13. Fill out the input fields for Name, Description, Type and Tags. Select Full as the profile type, and click Next.

  14. Select your infrastructure provider. This example uses AWS.

  15. Select the BYOOS pack. Use the following information to find the BYOOS pack.

    • Pack Type: OS
    • Registry: Public Repo
    • Pack Name: Bring Your Own OS (BYOOS)
    • Pack Version: 1.0.x or higher
  16. Update the pack YAML to point to your custom image. You can use the tag values that Packer assigns to the image to help you identify the correct value to provide. In the example output below, the tag values distribution_version and distribution are used to determine the correct values for the YAML.

    ==> amazon-ebs.{{user `build_name`}}: Creating AMI tags
    amazon-ebs.{{user `build_name`}}: Adding tag: "build_date": "2023-05-10T17:19:37Z"
    amazon-ebs.{{user `build_name`}}: Adding tag: "build_timestamp": "1683739177"
    amazon-ebs.{{user `build_name`}}: Adding tag: "kubernetes_cni_version": "v1.2.0"
    amazon-ebs.{{user `build_name`}}: Adding tag: "source_ami": ""
    amazon-ebs.{{user `build_name`}}: Adding tag: "containerd_version": "1.6.20"
    amazon-ebs.{{user `build_name`}}: Adding tag: "distribution_release": "Enterprise"
    + amazon-ebs.{{user `build_name`}}: Adding tag: "distribution": "rhel"
    amazon-ebs.{{user `build_name`}}: Adding tag: "image_builder_version": ""
    amazon-ebs.{{user `build_name`}}: Adding tag: "kubernetes_version": "v1.24.11"
    + amazon-ebs.{{user `build_name`}}: Adding tag: "distribution_version": "8

    In this example, the YAML is updated to point to the RHEL image created earlier. Use the table below to learn more about each variable.

    ParameterDescriptionType
    osImageOverrideThe ID of the image to use as the base OS layer. This is the image ID as assigned in the infrastructure environment it belongs to. Example: ami-0f4804aff4cf9c5a2.string
    osNameThe name of the OS distribution. Example: rhel.string
    osVersionThe version of the OS distribution. Example: 8string
    pack:
    osImageOverride: "ami-0f4804aff4cf9c5a2"
    osName: "rhel"
    osVersion: "8"
    info

    Depending on what platform you are targeting, the value you provide for osImageOverride may differ. For example, for AWS, the value is the AMI ID. For vSphere, the value is VM template path and name. Refer to the Reference Custom Image section of the BYOOS page for examples.

View of the cluster profile wizard

  1. Click on Next layer to add the Kubernetes layer.

  2. Select the desired Kubernetes distribution and version. Click on the </> button to display the YAML editor.

  3. Complete the remainder of the cluster profile creation wizard by selecting the next cluster profile layers.

You now have a cluster profile that uses the custom image you created using the Kubernetes Image Builder project.

warning

When deploying a host cluster, choosing the appropriate cloud provider and region where the image was distributed is critical to successfully launching a cluster using a custom image in the cluster profile. Failure to do so may result in Palette's inability to launch a cluster.

Validate

Use the following steps to validate your custom image is working correctly.

  1. Deploy a compute instance in the respective infrastructure provider using your custom image. Review the compute instance logs to learn more about any issues you may encounter.

  2. Next, deploy a host cluster using the cluster profile you created that contains the custom image. Verify the cluster is deployed correctly and without any issues. If you encounter any problems, review the cluster's event log to gain more details about the issue. Check out the Deploy a Cluster tutorial for additional guidance on deploying a host cluster.